Custom anodized aluminum sheet and coil for signs, decorative panels, interior cladding and fabrication. Clear-route substrates include 1050, 1060, 1100, 1200, 3003, 5052 and 5A02; choose the separate sheet, coil or decorative process configuration below.
Illustrative color directions only; these are not photographed product samples. Available finishes, color, texture and gloss await order confirmation and sample approval.
Anodized aluminum sheet and coil are specified as a system: base metal, surface preparation, anodic film, color process, sealing, fabrication route and inspection method. “Silver” or “black anodized aluminum” alone is not enough for a comparable quotation.
Tell us whether slitting, cutting, perforating or bending occurs before or after anodizing. A pre-anodized surface can crack at a tight bend or leave cut edges exposed depending on alloy, temper, film build and bend radius. The route must be reviewed before sampling.
Select the material form and finish first. Clear sheet, clear coil and continuous decorative anodizing use different dimension and film references.
On smaller screens, swipe the table horizontally.
Select a configuration name to include it in your inquiry. Enter your required dimensions in the form.
| Configuration | Substrate alloys | Thickness | Width / length | Anodic film / surface |
|---|---|---|---|---|
| Clear / natural anodized sheet | 1050 / 1060 / 1100 / 1200 / 3003 / 5052 / 5A02 | 0.50–6.00 mm | Width 500–1350 mm; length 500–4000 mm | 2–10 µm; single or double side by order |
| Clear / natural anodized coil | 1050 / 1060 / 1100 / 1200 / 3003 / 5052 / 5A02 | 0.20–2.00 mm | Width 50–1350 mm; coil length to order | 2–10 µm; plain or embossed route |
| Continuous decorative anodizing — configuration review | 1060 / 3003 / 5052 | 0.15–4.00 mm process reference | Process width up to 1800 mm; cut length to order | 1–25 µm process reference; natural, champagne, titanium-gold, gray or bronze; brushing / embossing by configuration |
The decorative row is a process-level reference, not a guarantee that every color, alloy, gauge and width can be combined. Clear-sheet limits are not applied to coils. Film, finish sample and exterior acceptance criteria are confirmed per order.
Pre-anodized aluminium sheet is anodized before downstream fabrication. Coil-anodized material follows a continuous coil process. Confirm the treatment sequence, alloy and finish against the final component; these terms do not make every forming route interchangeable.
For signage, interior panels or equipment fascia, specify grain direction, visible faces, flatness, film and protection. If the drawing calls for 5005 anodizing-quality (AQ) sheet, include that exact requirement and a control sample for alloy and finish review.
For clear anodized aluminum sheet or bronze and black interior cladding, agree the master sample, acceptable variation, viewing direction and sealing requirements. Matching a color name alone does not define the appearance across different alloys or batches.
For clear anodized coil or custom slit strip, supply finished width, coil ID, OD, weight, edge requirements and later bends. For cut-to-length sheet, provide length tolerance, squareness, flatness and protective-film requirements.
RFQ starting point: Brushed anodized aluminum sheet for decorative panels; alloy to drawing; sheet thickness and cut size; grain direction; approved finish sample; anodic film, sealing, protective film, forming details and quantity.
For 5005 AQ or another drawing-specified alloy, submit the substrate, temper and control sample with your RFQ. Exterior performance, optical reflectance and hardness require agreed acceptance criteria and written production confirmation.
Final tolerances, coil geometry, processing and packing follow our written quotation and approved production specification. Inspection documents are batch-specific and follow the agreed standard; MOQ, lead time and price follow the current quotation.
On smaller screens, swipe the table horizontally.
| Parameter | Order requirement |
|---|---|
| Dimensional tolerance / measurement basis | Quoted to order |
| Coil ID | Quoted to order |
| Maximum OD / coil weight | Quoted to order |
| Slitting / cutting / forming route | Single-/double-side anodizing, protective film, slitting, cut-to-length; engraving / forming by drawing |
| Inspection standard / batch documents | Quoted to order |
| Packing / protection / traceability | Quoted to order |
| MOQ / lead time / price | Quoted to order |
Inspection depth is selected for the application and order risk. Tests are never implied when they have not been requested and confirmed.
Material traceability, thickness, width or length, squareness, flatness and coil geometry as applicable.
Visual inspection, finish direction, anodic film mapping, gloss and surface-defect limits.
Approved control sample, agreed color comparison and specified sealing or corrosion checks.
Retained sample, inspection record, protective film or interleaving, labels and loading photos.
Photos show Puyu Aluminum production, finish samples, anodized coil forms and slitting operations. Select the finish, size, processing route and inspection criteria for your order.
The clear-sheet reference is 0.50–6.00 mm thick, 500–1350 mm wide and 500–4000 mm long. Clear coil is separately referenced at 0.20–2.00 mm thick and 50–1350 mm wide. Both use a 2–10 µm anodic-film reference. Confirm the alloy, temper, size combination and acceptance requirements in the quotation.
Send the 5005 AQ requirement, temper, dimensions, surface target and control sample. Anodizing quality depends on the substrate and processing, not the alloy number alone. We confirm the proposed material and finish route in writing.
Pre-anodized sheet is treated before cutting or forming; post-anodizing treats the fabricated part. Cutting and bending after anodizing can affect edges and the visible film. Include the final drawing to decide the required sequence.
Provide the environment, attachment details, visible faces, grain direction, color and surface acceptance criteria. Samples and the required film and sealing are reviewed for the intended application.
Submit the width and tolerance, edge condition, coil geometry and subsequent forming requirements. The slitting sequence relative to anodizing is part of the order review.
Use a physical master sample and agreed limits for color and gloss. Alloy, texture, brushing direction and processing can affect appearance, so finish samples need approval before production.
No. Submit the exterior project specification, alloy, anodic film, sealing, corrosion and weathering criteria, plus the fabrication and fixing details. A decorative appearance does not establish exterior compliance or a warranty.